Re: how to set Sky router Model SR102
Posted by Sébastien on 2015/12/29 14:44:02
Hi,
The start and end ports range should be set to the same (like 80-80) in TCP.
You should for example redirect this port 80 (public port range) to the local port you selected in Enigma-TV ... this on the IP adress of your PC where Enigma-TV runs on.
Do the same for the stream port range (like 8085 - 8085)
Best regards,
The start and end ports range should be set to the same (like 80-80) in TCP.
You should for example redirect this port 80 (public port range) to the local port you selected in Enigma-TV ... this on the IP adress of your PC where Enigma-TV runs on.
Do the same for the stream port range (like 8085 - 8085)
Best regards,
This Post was from: http://www.enigma-tv.com/modules/newbb/viewtopic.php?post_id=8352